Suitable for
adjusting, gluing and joining together blanks, especially for 2-piece floor
displays (stands), 2piece boxes etc., manual feeding. The display station can
be used for different jobs as well, with simple and fast machine set-up:
– to glue and close American boxes
automatically, manually feeding and pre-folding, automatically gluing and
closing.
– gluing and folding of a bottom flap from 30 –
80 mm by a special folding track.
– inline glue application unit for hot-melt and
cold glue applied by nozzles to a substrate blank.
Incl. two feeding
tables for feeding the top and bottom blanks by hand. Adjustable chains with
locks (tappets) register the blanks manually fed at their rear edge. Adjustable
side guides align the blanks correctly before they get glued and joined together.
Simple and fast adjustment and correction of the register by a simple hand
wheel is possible, also during machine operation. Hand feeding.
Blank width: min. 400 mm, max. 2,000 mm/for folding bottom flap: max. 1,930 mm
Blank length: min. 400 mm, max. 2,000 mm for die-cuts,
blanks/up to max. 1,600 mm
for folding bottom flaps
Output: speed up to 20 m/min., means approx.8 blanks / min.
speed up to 30 m/min., means approx. 12 blanks
/ min.
speed up to 50 m/min., means approx. 20 blanks
/ min.
Floor space: requirement:approx. 6 x 3.7 x 2 m (length x width x height) – weight approx. 2,000
kg
For more information
please don’t hesitate to contact us. Subject to change design (engineering)
without notice!
For futher informations please us the form
|